Tile Installation Ottawa Ottawa tile installers and tile contractors.

Ceramic, porcelain and large-format tile for showers, bathrooms, backsplashes and floors, set level with clean grout lines and waterproofed properly underneath. From one bathroom to 350+ showers in a single building.

4.9 on Google

Primary bathroom by Agora Flooring with vertical black tile and marble-look floor around a freestanding tub

At a glance

Agora Flooring is a tile contractor in Ottawa. Our tile installers set ceramic, porcelain, large-format and natural stone tile on floors, walls, showers, backsplashes and feature walls, for renovations across Ottawa and nearby towns. Showers are waterproofed with Schluter-KERDI and floors set over Schluter-DITRA before any tile goes on. Tile installation labour in Ottawa typically runs about $5.00 to $12.00 per sq ft, or $7.50 to $18.50 per sq ft supplied and installed.

What We Install

Ceramic, porcelain and stone tile for every room.

Porcelain, ceramic, glass, mosaic and natural stone tile flooring and walls for homes, condos and commercial buildings across Ottawa, set with attention to detail at every cut and edge.

Shower & Bathroom Tile

Walk-in showers, tub surrounds and bathroom floors and walls in porcelain, ceramic, glazed, glass and mosaic tile, from simple white to floor-to-ceiling statement tile.

Shower Waterproofing

Showers are waterproofed with the Schluter-KERDI system, with shower floors built on a sloped mortar bed or a KERDI shower kit, before a single tile goes on.

Kitchen Backsplashes

Kitchen and bar backsplashes in any tile and pattern, cut cleanly around outlets, windows and cabinets.

Large-Format Floors

Porcelain up to 24″ × 48″, set flat with a levelling system over Schluter-DITRA uncoupling membrane, in straight, herringbone, checkerboard, hex and custom patterns.

Natural Stone

Marble, granite and slate for floors, walls, entrances and mudrooms, plus stone-look porcelain where real stone would be harder to maintain.

Feature Walls & Fireplaces

Floor-to-ceiling fireplace walls, tiled columns and accent walls in large-format and slab-look tile.

Ottawa Tile Contractor

Who installs your tile.

Agora Flooring is an Ottawa tile contractor. Our site supervisor, Fergan Sik, has more than 20 years of tile and flooring experience and runs the work on site, so the standard is the same in one bathroom as in a building with hundreds of suites. You deal with one company from the first site visit to the final walkthrough, and the job finishes at the price in your written quote.

We have been installing tile and flooring in Ottawa for more than 26 years, over 850,000 sq ft in all, from single bathrooms and kitchens to the 270-unit Hintonburg Rentals and the 288-unit Rideau Registry. We are WSIB covered and carry $2 million in liability insurance, two things worth checking with any tile installer before work starts in your home.

Ceramic, porcelain and large-format tile

We install ceramic and porcelain tile, as well as glass, mosaic and natural stone. Porcelain is dense and absorbs almost no water, so it suits floors, showers and entries that take salt and slush all winter. Ceramic tile is less dense and easier to cut. It works well on walls, tub surrounds and backsplashes, and on floors when it is rated for floor use. Large-format porcelain, up to 24″ × 48″, needs a flatter floor and a levelling system, and the layout is planned so the long joints run straight through the room.

Floors, walls, showers and backsplashes

For homeowners, tile work usually comes with a renovation: a bathroom with a new walk-in shower, a kitchen with a new floor and backsplash, or an entry, mudroom, laundry room or fireplace wall. We tile all of them. See bathroom renovation tile and showers and kitchen backsplash installation. In a renovation we do the tile, the shower waterproofing and the heated floor. Plumbing and electrical are done by those trades, and a licensed electrician makes the final connection for floor heating.

Our Tile Work

Recent tile work in Ottawa.

Real jobs by the Agora teams.

Shower tiled floor to ceiling in black hexagon mosaic
Black hex mosaic shower
Shower in bold-veined large-format marble-look porcelain
Large-format marble-look shower
Tub surround in handmade-look emerald green glazed tile
Emerald glazed tub surround
Black and white porcelain floor laid in a quarter-circle pattern
Quarter-circle pattern floor
Natural slate floor through a custom mudroom
Natural slate mudroom
Floor-to-ceiling fireplace wall in large-format stone-look tile
Stone-look fireplace wall

View the full gallery

How It Works

From site visit to finished tile.

  1. Free site visit

    We measure, check the floor and walls, and talk through tile, layout and timing.

  2. Written quote

    You get the price in writing before anything starts, and the job finishes at that price.

  3. Preparation

    Floors are levelled, DITRA goes down, and showers are waterproofed before any tile is set.

  4. Installation

    Tile is laid out so cuts land evenly, set flat and level, then grouted and sealed where needed.

  5. Clean handover

    We leave the space clean and walk through the finished job with you.

Our Process

How our tile setters work.

The site visit

We start by measuring the room and looking at what the tile will sit on: how flat the floor is, whether a wood subfloor bounces, whether the walls are straight, and where the drain and valves are in a shower. We talk through the tile you like, the layout and the timing, then send a written quote. If a visit isn't practical yet, photos and rough measurements by email are a good start.

Layout

Before any tile is set, the layout is worked out so the cuts land evenly: full tiles at the doorway and on the most visible wall, a shower niche or valve lined up with the grout lines, and a backsplash centred on the range or sink. Good layout is what makes finished tile work look right.

Preparation

Old tile or flooring is removed when it is part of the job, low spots are filled or levelled, and floors get Schluter-DITRA uncoupling membrane before tile goes down. Walls are checked for flatness too, because a wall that is out shows at every tile edge.

Waterproofing in showers

Shower walls and floors are covered with the Schluter-KERDI membrane, with the seams overlapped or covered with KERDI-BAND and the corners, valves and drain sealed. The shower floor is sloped to the drain on a mortar bed or a KERDI shower kit. Only then does the tile go on. See how a tiled shower is waterproofed.

Setting the tile

Tile is set in a mortar suited to the tile and the surface, with near-full coverage under every tile so nothing sounds hollow or cracks later. Large tile is back-buttered and set with a levelling system to keep the edges flush. Cuts around outlets, pipes and corners are made clean, and exposed edges get a metal profile or a finished tile edge.

Grout and handover

Once the mortar has set, the joints are grouted in the colour you chose, the tile is cleaned, and grout is sealed where the product needs it. We walk through the finished job with you and leave the room clean. A tiled shower usually takes several days from start to finish, because each layer needs time to set before the next one.

Tile Installation Cost

What tile installation costs in Ottawa.

Typical 2026 prices in Ottawa, from the average of the published price ranges of four Ottawa flooring companies, before HST. Once the room is measured and the floor or walls are checked, your written quote replaces them with an exact price.

Tile installation (labour)About $5.00 to $12.00 per sq ft
Porcelain or ceramic tile, supplied and installedAbout $7.50 to $18.50 per sq ft
Bathroom tiling (floor and shower walls)About $3,500 to $12,000+
Kitchen backsplashFrom about $1,200

Large-format tile, herringbone and other patterns, removing old tile, levelling the floor and waterproofing a shower all add to the price. More detail: tile installation cost in Ottawa, the cost to tile a shower and our Ottawa flooring cost guide.

Service Area

Tile installers across Ottawa.

Our tile installers work across the city: in Kanata and Stittsville, Barrhaven, Riverside South and Manotick, Nepean, Orléans and Gloucester, and in Centretown, the Glebe, Westboro, Hintonburg, Alta Vista and Vanier. We also tile in nearby towns: Carleton Place, Almonte, Arnprior, Rockland, Embrun, Russell and Kemptville. Wherever you buy your tiles in Ottawa, Ontario, or if you would rather we source them, the installation is planned the same way.

Whether it is one bathroom floor or a whole building, the job runs the same way: a free site visit, a written quote, proper preparation underneath, and tile set flat and level. See areas we serve, or ask for a free estimate.

Tile Installers Near You

Looking for a tile installer near you?

Search “tile installers near me” or “tile contractors near me” and you get a mix of tile stores, renovation firms and installers. We are a flooring and tile installer: you can choose your tile at the Ottawa tile store or showroom you like, or have us source it, and we install it. We are happy to talk through sizes, quantities and setting materials before you buy.

Being close by matters on a tile job. We measure on site before quoting, we come back on the days a shower needs between waterproofing, setting and grout, and we stand behind every installation with a workmanship warranty. We work across Ottawa and in Rockland, Embrun, Russell, Carleton Place, Almonte, Arnprior and Kemptville.

Before you hire anyone, ask who will be on site, how the floor will be prepared, how the shower will be waterproofed, whether the quote is in writing, and whether the company is insured and WSIB covered. Our guide to hiring a tile installer has the full list. To talk about your project, call 613-501-0963 or ask for a free estimate.

Tile Installation Services

Ceramic and porcelain tile installation in Ottawa.

Our tile installation services cover tile floor installation, wall tile installation, tiled showers with waterproofing, kitchen and bathroom tile, backsplashes, feature walls and heated tile floors, in ceramic, porcelain, large-format, mosaic and natural stone. As tile flooring contractors, we look after the whole floor: the subfloor checks and levelling, the membrane, the layout, the setting, the grout and the transitions to the next room.

Tiler, tile setter or tiling contractor?

Tiler, tile setter, tile installer and tiling contractor are names for the same trade: the people who prepare the surface, lay out the tile, set it and grout it. You will also see floor tile layers and ceramic tilers, and some tile installation companies list tile floor installers and wall tile installers separately, but a professional tile installer does both. In everyday speech the same person is often just the tile guy, and job postings call the trade a tile technician or a tile worker.

The difference is in who takes responsibility for the job. A tiling contractor or tile installation company gives you the written quote, plans the materials and the schedule, carries the insurance and WSIB coverage, and answers for the finished work. Agora Flooring is a tile installation company: our tile installers do the work, and our site supervisor runs it on site from the first cut to the final walkthrough.

Residential tile installation

Most of our work for homeowners is residential tile installation as part of a renovation: floor and wall tile in a bathroom, a new tiled shower, a kitchen floor and backsplash, an entry or mudroom, a laundry room or a basement floor. Flooring and tile installation often go together in the same project, and we install hardwood, laminate, vinyl and carpet as well, so the tile floor and the floors beside it are planned as one job with matching heights at the doorways.

Ceramic tile installation

Ceramic tile is lighter and softer than porcelain and cuts more easily, which is why it is the usual choice for wall tile, subway tile, tub surrounds and backsplashes. Ceramic floor tile works in lighter-traffic rooms when the box says it is rated for floors.

Our ceramic tile installation follows the same rules as any tile job: a flat, sound surface, a mortar suited to the tile, full coverage under every piece and clean, finished edges. We install ceramic tile across Ottawa, Ontario, and in the nearby towns we serve. If you are comparing ceramic tile installation contractors, or looking for a ceramic tile contractor near you, ask how they prepare the floor and whether the quote is in writing.

If you are having custom ceramic tile made, by an Ottawa maker or one further away, show us a sample before the order is final: handmade pieces vary in size and thickness, so the joint width, the mortar and the extra tile to order are planned around them. If you are not sure whether your tile is ceramic or porcelain, see porcelain vs ceramic tile.

Porcelain and large-format tile installation

Porcelain tile installation takes more care than ceramic. Porcelain is dense, so it needs a polymer-modified or large-tile mortar and porcelain-rated diamond blades for clean cuts. Large-format porcelain needs a floor flat to about ⅛″ over 10 feet, back-buttering, a levelling system and often two people to set each tile. If you are looking for large-format tile installers, ask how the installer checks and corrects floor flatness before quoting; it decides whether the edges end up flush. See our large-format tile guide.

Wall tile installation

Wall tile is set from a level line rather than from the floor or the tub, in a non-sag mortar that holds each tile while it cures. The layout is centred on what you see first, such as the vanity, a window or the middle of the wall, so the cuts at the corners and the top are even. Where tile goes around outlets, a licensed electrician extends or moves the boxes if needed. Inside a shower, waterproofing goes on first. See how to tile a wall.

Kitchen tile installation

Kitchen tile installation usually means a new tile floor, a backsplash or both, and if you are looking for kitchen tilers, we do both. For the floor, decide early whether the tile runs under the cabinets or stops at them, and plan the floor height at the dishwasher. A kitchen floor and backsplash can be quoted and tiled as one job. See kitchen flooring before or after cabinets and kitchen backsplash installation.

Handyman, independent tiler or tile company?

A handyman tiler or an independent tile installer can be a good fit for a small, simple job. For a shower, a heated floor or large-format porcelain, ask any installer the same questions: how the floor or walls will be prepared, which waterproofing system will be used, whether the quote is in writing, and whether they carry liability insurance and WSIB coverage.

When you search for the best tile installers, the best tile contractors or the best tile company near you, the best one for your job is the one who answers those questions clearly, shows you recent work and is close enough to come back on each day the job needs. That is why the best tilers for a shower are usually local tilers: a shower needs visits for the waterproofing, the setting and the grout. Our customers rate us 4.9 on Google, and our recent tile work is in the gallery.

Only need a few cracked tiles replaced or a shower regrouted? See our tile repair in Ottawa page.

Commercial tile installers

We are also commercial tile installers, working on condominium and rental buildings, lobbies, corridors, institutions and aquatic facilities, from the 270-unit Hintonburg Rentals to the mosaic at Canterbury Pool. See commercial flooring.

Tile Floors · Installation · Ottawa

Tile floors, start to finish.

Checking the subfloor

A tile floor is only as good as what it sits on. Wood subfloors are checked for bounce and loose panels, and concrete for cracks and moisture. Both are checked for flatness, because large tile shows every dip and hump. Low spots are filled or levelled and high spots ground down before anything else goes on.

Choosing floor tile

Porcelain is the usual choice for tile flooring in Ottawa homes: it is dense, hard-wearing and absorbs almost no water. Matte and textured finishes give more grip than polished tile, which matters in entries, kitchens and bathrooms. Mid-size tile is the most forgiving; very large tile needs a flatter floor, and small tile and mosaics have more grout to keep clean. See porcelain vs ceramic tile. We highly recommend looking at several tiles from the same box before you buy, because shade and pattern can vary from tile to tile.

Planning the layout

The layout is set out before the first tile goes down: where full tiles land at the main doorway, how the pattern lines up with the longest wall or a kitchen island, and where the cuts can hide under cabinets or furniture. Patterns such as herringbone take more planning, more cuts and more tile. See common tile layout patterns.

Grout joints and colour

Rectified tile, with precisely cut edges, can take a narrower joint than pressed tile, but every tile needs some joint to allow for small size differences and movement. A grout close to the tile colour makes the floor read as one surface; a contrasting grout shows off the pattern. See grout types explained.

Doorways and transitions

Where tile meets a hardwood floor, vinyl or carpet, a metal profile protects the tile edge and handles any height difference. The profile is set in as the edge tiles go down, so it is chosen before tiling starts. Doors may need trimming to clear the new floor.

Kitchens and appliances

In kitchens, running the tile under the dishwasher and fridge spaces means the appliances can come out later without leaving a gap in the floor. The finished floor height is checked so the dishwasher still fits under the counter.

Heated tile floors

Electric floor heating goes in under the tile, so it is decided before the tile is ordered. See heated floors.

Tile next to other floors

Tile is often one part of a larger flooring installation. We also install hardwood, laminate, vinyl and carpet, so the tile and the floors beside it are planned together, with transitions as close to level as the materials allow.

Living with a new tile floor

Light foot traffic usually waits about a day, and heavier use and washing wait until the grout has cured. See how long before you can use new tile, and for prices, what tile installation costs in Ottawa.

Questions

Tile installation FAQ.

How much does tile installation cost in Ottawa?

Tile installation labour in Ottawa typically runs about $5 to $12 per square foot, or about $7.50 to $18.50 per square foot with porcelain or ceramic tile supplied, based on the published 2026 prices of Ottawa flooring companies. Tiling a bathroom floor and shower walls typically costs about $3,500 to $12,000 or more. Large-format tile, patterns, removing old tile, levelling and waterproofing add to the price. We give free estimates and a written quote before work starts. See tile installation cost in Ottawa.

How do you waterproof a tiled shower?

We use the Schluter-KERDI waterproofing system on shower walls and floors, with shower floors built on a sloped mortar bed or a KERDI shower kit, so water never reaches the drywall or framing behind the tile. See the custom showers at 404 Ashbee Court, or read how a tiled shower is waterproofed.

Can you install large-format tile?

Yes. Large-format porcelain is a large part of our work, including 24″ × 48″ tile throughout the 288-unit Rideau Registry building. Large tile needs a very flat surface, so floors are levelled first and tile is set with a levelling system. More in our large-format tile guide.

Do you install natural stone?

Yes: marble, granite and slate floors, walls and fireplace surrounds, as well as stone-look porcelain for spaces where real stone would be harder to maintain.

How long does it take to tile a shower?

A tiled shower usually takes several days rather than one, because the mortar bed, the waterproofing and the grout each need time to set before the next step. We give you the schedule with your quote.

Where do your tile installers work?

Across Ottawa, including Kanata, Stittsville, Barrhaven, Nepean, Orléans, Gloucester and central Ottawa, and in nearby towns: Carleton Place, Almonte, Arnprior, Rockland, Embrun, Russell and Kemptville. See areas we serve.

How do I choose a tile installer near me?

Ask who will do the work and who supervises it, how the floor or walls will be prepared, how a shower will be waterproofed, and whether the quote is in writing. Ask to see photos of recent tile work, and check that the company is WSIB covered and insured. Our site supervisor, Fergan Sik, has more than 20 years of experience, and we carry $2 million in liability insurance. More in hiring a tile installer.

What does a tile setter do in a bathroom renovation?

A tile setter plans the layout, prepares the floor and walls, waterproofs the shower, sets the tile, then grouts and cleans up. In a bathroom renovation we do the tile, the shower waterproofing and the heated floor, while plumbing and electrical are done by those trades. See bathroom renovation tile and showers.

Do you install ceramic tile as well as porcelain?

Yes. We install ceramic and porcelain tile on floors, walls, showers and backsplashes, as well as glass, mosaic and natural stone. Porcelain is denser and absorbs almost no water, which suits floors and showers. Ceramic is easier to cut and suits walls and backsplashes. See porcelain vs ceramic tile.

Can you install tile I bought myself?

Yes. Send us the product name and size, or leave a box on site, so we can check the maker's installation instructions and plan the right mortar, grout and trims. Order about 10% extra for cuts and spares on a straight layout, and more for patterns such as herringbone. See how much tile you need.

Can you add a heated floor or a backsplash to the tile job?

Yes. Electric floor heating goes under the tile, so it is planned with the floor, and a licensed electrician makes the final connection. See heated floors. A new kitchen floor and backsplash can be quoted and tiled as one job. See kitchen backsplash installation.

What is the difference between a tiler and a tile setter?

There is none in practice: tiler, tile setter, tile installer and tiling contractor all describe the trade that prepares the surface, sets the tile and grouts it. What matters is who answers for the job. A tile installation company such as Agora gives you a written quote, carries liability insurance and WSIB coverage, and has a site supervisor running the work.

Do you do kitchen tile installation?

Yes. We tile kitchen floors and backsplashes, separately or as one job. For the floor, we plan with you whether the tile runs under the cabinets and how the floor height works at the dishwasher. See kitchen backsplash installation.

Do you install wall tile as well as floor tile?

Yes. Wall tile installation is a large part of our work: bathroom walls, wainscots, tub surrounds, shower walls over waterproofing, backsplashes and fireplace walls. Wall tile is set from a level line in a non-sag mortar, with the layout centred so the cuts are even. See how to tile a wall.

Do you take on commercial tile projects?

Yes. We tile condominium and rental buildings, lobbies, corridors, institutions and aquatic facilities, including more than 10,000 sq ft of mosaic at Canterbury Pool. See commercial flooring.

Tile installation guides: how to tile a floor, how to tile a shower, which thin-set to use, the right subfloor for tile, tile edge trim and mitred edges, cutting porcelain, tile patterns and layouts, grout joint width, movement joints, mosaic tile, marble thresholds and hiring a tile installer.

More in our flooring guides: how showers are waterproofed, large-format tile, herringbone floors, tile installation cost, Schluter-DITRA, choosing shower tile and grout types. Also: porcelain vs ceramic, modified vs unmodified thin-set, levelling a floor, linear shower drains and fixing a chipped tile.

More tile guides: what to expect from a tile installation, how to grout tile, how to tile a wall, how much tile you need, removing old tile, wood-look tile, hexagon tile, subway tile patterns, cement tile, terrazzo tile, travertine and natural stone, fireplace tile, feature walls, entryway tile and laundry room tile.

How We Work

Fast, flexible and backed by a warranty.

Same-week installation

When your flooring is in stock, we can usually install it the same week, so your project doesn't sit waiting for months.

Estimates your way

Free estimates in person, by phone, by email or online. Tell us about the project, send photos if you have them, or book a visit and we'll measure on site.

Workmanship warranty

We stand behind every installation with a workmanship warranty. Ask us what it covers for your project.

3D design consultations

Our favourite part! See your room finished in hyper-realistic 3D before anything is installed. From $150, and the design fee is waived when you hire us. See the packages.

Free Estimate

Planning a bathroom, shower or new floor?

Tell us about it and we’ll give you a free estimate in person, by phone, by email or online.

4.9 on Google

BBB Accredited Business: see Agora Flooring's BBB profile

  • 26+ years in Ottawa
  • WSIB covered
  • $2 million liability insurance
  • Free written quotes
  • Workmanship warranty

A phone number or an email is enough, whichever you prefer.

Submitting opens your email app with this request filled in, addressed to info@agoraflooring.com.

Prefer to talk? Call 613-501-0963. We use your details only to reply to this request. No newsletters. Privacy policy.